1. The installation foundation must be stable to avoid settlement. Reasons for analysis: If the concrete structure is thick enough for the relatively tight ground, you can directly carry out the construction of the anchor bolts; for the loose foundation, you must re-excavate the foundation area where the equipment is installed and apply a sufficient thickness. Concrete to prevent equipment settlement in the later stage.
2. The size of the foundation should be large enough and the thickness of the concrete thick enough. Reasons for analysis: Heavy-duty and precision machining center machine tools should be installed with separate foundations, and the machining center, and the foundation size should not be less than the outer dimension of the machine tool support area, and should meet the size required for installation, adjustment and maintenance; foundation concrete construction thickness To meet national standards.
3. Vibration isolation groove analysis is required for the machine tool of the precision CNC machining center. The processing accuracy of the precision machining center is greatly affected by the vibration, especially when there is a relatively large vibration source (such as a punch) around the spindle oil cooler of the machining center. , The installation of vibration isolation trench can effectively weaken the impact. The depth of the vibration isolation groove should be the same as the base depth, and the width is generally 10 cm. The vibration isolation groove is filled with sponge, latex and other materials.
4. The foundation of the heavy machine tool should be isolated from the support of the column of the plant. Reasons: Due to the heavy weight of the heavy machine tool and the heavy weight of the processed parts, the impact on the foundation is greater. If it is connected to the column support of the plant or is too close, it may support the column of the plant. Have a certain impact, which in turn leads to unpredictable security risks.
