The stainless steel pipe is formed by processing and deforming the elbow. In the processing process, there are some difficulties, so it is required to pay attention to the adjustment, cooling and lubrication of the tool during processing. Here are the various forms of mutual processing and deformation of stainless steel tubes.
Form one, flanged and rounded tube, the former refers to the tube end convex to the inside or outside, the latter refers to the tube that forms a ridge or groove in the circumferential direction of the tube;
Form two, stainless steel elbow variable wall thickness stainless steel pipe, the wall thickness changes along the length of the pipe;
Form three, stainless steel elbow bend pipe, we have more contact with it, that is to change straight pipe into bend pipe with different radius of curvature, such as elbow, elbow, etc.;
Form four, stainless steel elbow variable diameter pipe, refers to the reduction of the diameter of the pipe end or a certain part of the pipe;
Form 5, pipes with crimping and sealing bottom, increase the total strength of the pipe end to the outer or inner side of the pipe crimping or sealing the end of the pipe;
Form 6: Process the section of the tube to change the circular section into a square, oval, or polygonal shape.
